|
Incra MITERV27 Miter V27 Miter Gauge
Make angle cutting easier, faster and more accurate. The V27 is engineered to provide high performance to your band saw, router table, disk sander, belt sander or any other tool in need of a better Miter Gauge. Incras exclusive AngleLOCK indexing system and its patented Adjustable GlideLOCK Miter Bar are laser cut in solid steel to lock in angles at exact 5 degree steps over a full 120 degree range, with special stops at positive and negative 22.5 degrees. The 18" Miter Bar features four patented expansion disks that adjust the GlideLOCK Miter Bar for ZERO side play, anti friction travel on all shop tools with standard 3/4"x3/8" miter gauge channels. The V27 vertical work support surface doubles as a universal mounting bracket that makes adding any fence easy. Made in USA.
Get perfectly accurate miter cuts with Incra's Miter V27 Miter Gauge featuring 27 angle stops for precise incremental control. This affordable gauge is a high performance miter gauge designed to fit your table saw, band saw, router table, disk sander, or belt sander like a glove. While the V27 delivers all of the accuracy of its bigger Incra Miter Gauge brothers, its no-nonsense design and compact size make it the most affordable Incra miter gauge in its class. The V27 delivers extreme miter cutting accuracy thanks to Incra's exclusive AngleLOCK indexing system and adjustable GlideLOCK Miter Bar. Equipped with Incra's exclusive AngleLOCK Indexing System, the MITERV27 offers 41 locking angle stops in 5-degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts. Special stops at plus or minus 22-1/2 degrees for optimal versatility. Incra's Flip Shop Stop offers instant, repeatable accuracy for less downtime and more productivity. Dual, pivoting flip arms mean dead on accuracy. The machine bar is fitted with Incra's exclusive top-mounted, T-slot retainer clip, which is easily removed for use in non-T-slot channels. Four expansion points adjust for zero side play, anti-friction travel on all tools with standard miter gauge channels, including Delta, Craftsman, and imports. This means the bar won't wiggle around in the miter slot. Also, with the Universal Mounting Bracket that supports any user-made fence as well as any Incra fence, it's possible to put an Incra Miter Gauge in every standard miter channel in your shop.
Incra MITERV27 Miter V27 Miter Gauge Accessories
 Incra IG32 Incra Gauge
Incra T-RULE06 6-Inch Precision Marking T-Rule
Jet JW1044 4-Inch to 2-1/2-Inch Reducer
Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables
Incra MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
Incra T-RULE12 12-Inch Precision Marking T-Rule
The Bandsaw Book
Bench Dog 10-012 Miter Slot Adapter
Kreg SKO2 Pocket Hole Screw Kit
Bench Dog 40-001 ProTop Contractor Benchtop Router Table
Incra MITERV27 Miter V27 Miter Gauge Reviews
ONCE SET FOR 90 ANGLE VERY ACCURATE. THIS HAS BEEN A GREAT ADDITION FOR MY SAW. SIMPLE TO ADJUST AND SET. ADDED MY OWN WOOD EXTENSION WITH SCREWS. FITS SNUG IN MITER SLOT FOR ZERO SIDE PLAY.
This did the trick but took about 10 Mins. The instructions state that it will take a good bit of torque to adjust. I had to apply quite a bit of heat to the bar before I was able to expand the washers and close the gap as designed. I bought this today and was excited to set it up. I read the instructions and tried to adjust it to fit my table saw's miter slot. This seems like a great miter gauge, but, boy it took more to set up than expected. for each of the four adjustment washers. Well, I supplied such torque and stripped the provided hex wrench.
Since I have a nice cross-cut sled that I built to handle all of my 90 degree cuts, all I really needed was a decent quality miter gauge to handle any angle cutting or "nibble" cuts that I may need to make on the table saw. If I had an unlimited tool budget I would probably be buying the Osborne miter gauge, but that is a good $100 more than I wanted to spend. I highly recommend this tool. The gauge even has holes pre-drilled so you can attach a wood face to it. Kudos to INCRA for filling the price gap between super expensive quality and cheap inferiority. To set an angle, the large black knob/handle is loosened counter-clockwise and then the small black rectangular knob is loosened counter-clockwise. In use I have found a couple of great things to say about this gauge.
Right out of the package this gauge feels hefty and solid. Repeatability. First, the three expansion adjusters on the bar allowed me to take every bit of wiggle out of it while riding in my saw's miter slot. I recommend that you do this as the metal face of the gauge is a bit slippery. As long as you remember what angle you used on a cut, you can make an absolutely identical cut days/weeks/months later because of the perfect accuracy of the "V" angle stops. The second greatest feature of this gauge is its angle setting capabilities. As a home woodworker I have always bristled at the prices of the high end miter gauges on the market and the low cost gauges always seemed to be flawed in so many ways that they were not worth owning.
This Incra V27 gauge has been just the solution I was looking for. After setting the "V" angle, both black knobs are tightened and this gauge is ready to make a tousand perfectly accurate cuts. wood on wood is always preferable in this case. At this point the "V" shaped angle finder can be freely adjusted into any one of the 27 pre-determined angle stops.
|
