|
Kreg SML-F125-1000 1-1/4-Inch #7 Fine Pocket Hole Screws with Pan-Head, 1000-Pack
1 1 4" Fine Thread self tapping screws are specially designed for pocket hole joinery. They feature a self tapping auger point that eliminates pre drilling and a flat head that seats flushly in the bottom of the pocket hole. All of our screws utilize a No
The Kreg 1-1/4-Inch #7 Fine Pocket Hole Screws with Pan-Head is ideal for 3/4-inch thick hardwood work pieces. The washer head prevents overdriving in pocket bottoms, which is especially critical in composite and plywood work pieces. The self-tapping type 17 auger tip eliminates the need to predrill, and its larger diameter steel shank creates a nearly unbreakable screw. The bronze-colored finish and dry-lubricant coating improves driving torque and rust resistance. This pack includes 1,000 hole screws.
Kreg SML-F125-1000 1-1/4-Inch #7 Fine Pocket Hole Screws with Pan-Head, 1000-Pack Accessories
 Kreg SML-C125 1-1/4-Inch #2 Coarse Screw (1000-Pack)
Kreg DDS 3-Inch #2 Square Driver Bit and 6-Inch #2 Square Driver Bit for Kreg Pocket Hole Systems
Kreg K3MS K3 Master Pocket Hole Jig System
Kreg RAC Right Angle Clamp
Kreg KJD Replacement Twist Step Drill Bit for Kreg Manual Pocket Hole Systems
Kreg SKO2 Pocket Hole Screw Kit
Kreg P-OAK Oak Plugs for Pockets (50-Pack)
Kreg V03-DVD Pocket Hole Joinery DVD, Cabinet Making
Kreg NZ03 Magnetic Drawer Slide Mounting Tool
Kreg SPS-C1-500 Pocket Hole Screws 1-Inch #7 Coarse Pan-Head 500ct
Kreg SML-F125-1000 1-1/4-Inch #7 Fine Pocket Hole Screws with Pan-Head, 1000-Pack Reviews
I haven't used my pocket hole system yet, but I will. You gotta have screws to do the job. What can I say.
Every Kreg product I've ever used and I have most of them is superb.
I use these screws to build face frames, cabinets, and boxes from hardwood (maple, oak, etc) and they work great. Highly recommended. And they work perfectly with the pocket hole jig. I have never had a piece of wood split from driving the screws in, due to the drill-points.
A Good bargain if you plan on building lots of frames using your kreg jig. These screws are made specifically for the Kreg jig tool. This is the size I use the most so I stocked up. It's hard to find these screws locally or they come in small bags or multi size packs.
I'm on my 50th or so pocket hole and gaining much confidence as I go along. Highly recomended product. These screws are top notch, receiving all the torque the square drive can delivery.
|
