|
Makita 3612 3-1/4 HP Plunge Router
Electric Brake only - 9,000-23,000 RPM Electronic variable speed Control (G2170), 15 Amp, 2 23/64" plunge depth capacity, 3 plunge depth presets, 1/4" and 1/2" collet capacity, Non-marring base, Chip deflector, Contoured handles with built-in switch, Weighs 13.2 lbs., Comes with 1/4" collet cone, spindle wrench.
With a powerful 15 Amp motor, the Makita 3-1/4 HP Plunge Router delivers 22,000 RPM for smooth, clean routing. Featuring an electric brake for quick stops, it won't mar your workpiece. The 2-3/8-inch plunge depth capacity provides easy penetration and multiple depth adjustments. Designed with all ball bearing construction, this Makita is built to last. A conveniently located switch allows for easy operation, and accepts 1/2-inch and 1/4-inch shank bits. The shaft lock provides quick and easy bit changes. This plunge router comes with a 1-year warranty. What's in the Box
3-1/4 HP plunge router, 1/4-inch collet sleeve, 1/2-inch collet cone, and two wrenches.
Makita 3612 3-1/4 HP Plunge Router Accessories
 Porter-Cable 690LR 11 Amp Fixed Base Horsepower Router
Makita BDF452HW 18-Volt Compact Lithium-Ion Driver Drill Kit
Makita 3612C 3-1/4 HP Variable Speed Plunge Router
Fein 63502151020 1 1/8-Inch Universal E-Cut Blade, 3 Pack
Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner
Makita 9403 11 Amp 4-Inch by 24-Inch Belt Sander with Cloth Dust Bag
Makita LS1040 10-Inch Compound Miter saw
GREX P6/20L 23 Gauge 3/4-Inch Length Headless Pins (10,000 per box)
GREX P6/12L 23 Gauge 1/2-Inch Length Headless Pins (10,000 per box)
Porter-Cable 7310 5.6 Amp 3/4 Horsepower Laminate Trim Router
Makita 3612 3-1/4 HP Plunge Router Reviews
In our workshop this router lasts about two years. My last router was the 3612c, the variable speed model, and that aspect of the machine was its biggest drawback. I highly recommend it, with the caveat that everyday usage will limit its lifespan. I am a professional timberframer and we use the 3612 to rout out our pockets, wire chases, housings, etc. I had no need to reduce power, and after putting the machine through the timber frame paces the wires to the variable speed function burned through. It's a solid tool with a lot of power and plunge capacity. Unfortunately Makita's engineers make it so that a repair is impossible, and I was left with buying a new machine.
This is a replacement for the prior 3 1/2 hp Makita router. It's a beast of a router and I highly recommend it. When it was pulled from that fixture, it was put on a trammel and used to cut round table tops out of 5/4 red oak. It finally quit working after being used in a shop built tenon machine for 24 years and making many,many,tenons.
I keep it clean, so perhaps I have avoided other problems that might come up. 4) I recently bought a Router Raizer unit to use with the 3612. The pros of this unit:. While this may also double as a strength, the power of the system comes at a price. The router spins up smoothly with or without the use of a speed controller. The motor shaft is still tight and smooth after 10 years of table mounted use. Topside elevation changes are very well controlled using this system, and the system works seamlessly with the original Makita functionality.
The cons of this unit:. 4) The lack of the speed control in the 3612 as compared to the 3612C is a bit of an issue. I have used it with a speed control unit very successfully, with little or no loss of power and torque for table mounted applications. While Rockler and others do carry table plates and universal baseplate mounts to utilize Porter Cable template inserts, there are not as many options other than those Makita supplies with the unit (edge guide, etc). 3) Smooth operation. The 3612 can get a bit heavy for handheld use at uncomfortable angles and heights.
Amazing machine. Like I've said above, I really like this router. Some people may argue this point, but I feel the positioning of the handles, switches, and levers are very functional and easy to manage when plunge or template routing with the unit. This isn't really the fault of the 3612, but power can have its price. I might not have needed the Router Raizer with a newer unit. 2) Well built with craftsmanship. 5) An absolute pro for 1/2" shank bits and panel raising bits. I have even done plunge and rabbet operations for 1 1/2" deep grooves with no issue.
2) Not a large number of accessories available by third parties. It does require an external speed controller when working in hard to route materials like maple, hemlock, and other hard woods. I have broken 1/4" shaft bits during template half blind dovetail cutting in maple. Not even the hardest and most figured sugar maple slows the 3612 down. 1) Immensely strong, as is stated in other reviews. 6) Well balanced with good handle ergonomics.
1) Heavyweight. This machine is perfect for table mounting and can handle any bit you want to attempt. I bought it gently used from the father of a friend who had owned it for at least 3 additional years, and have used it on many furniture and cabinetry projects for my family. The installation of this add on has made the unit even more useful and valuable for table mounted applications. 3) Also tied to the strength of the unit, I have found it to be almost too powerful when using 1/4" bits.
If I were to replace or buy a second 3612, I would most certainly acquire the 3612C in order to get the speed control and soft start built into the unit.
I have used it for about ten years on furniture and cabinetry projects in maple, oak, pine, fir, cedar, redwood, others, and have never had any trouble with it with any table mounted, handheld, or plunge routing project.
The 3612C has a 5 speed control, which is sufficient for most applications.
This made the system even more useful to me.
I have nothing but praise for the Makita 3612 plunge router.
I have not needed to replace any component on the unit in all my use.
I have used a wide variety on a lot of different woods and have never found an issue or limitation.
The router isn't struggling even in a hard cut, and can sometimes result in damage to the 1/4 bit because you feel that you can push harder laterally than the bit shaft can handle without damage.
The newer 3612s have an efficient height control knob, whereas the older units did not.
This has to be, without a doubt, the sturdiest router around. My only regret is that the square base (quite a bit larger than the round) doesn't seem to be available anymore. I just ordered the variable speed version of this router to replace a 3612B (square base) that I bought in 1985. It was great being able to turn it upside down, lock it in a vice, adjust the fence in, and use it as a mini router-table. It just can't be beat for the price, I just went down and looked at the competition this week and they are either way more expensive or junky.
It seems big and powerful. It was bought, after as much consideration as i could, including advice from Lee Valley. And the first thing that happened when i tried to fit a 1/4 in bit, was that the collet adaptor fell into the throat, necessitating unmounting to get the darn thing out. I have had many machines on this circuit, and this is the first time this has happened. It runs fine on juice supplied from a regular breaker, from another part of the house. The power, smoothness and utility are obvious. But.
I have an arc fault breaker on the circuit, as this will be a bedroom when my renovations are completed. And the next thing that happened was that it blew the breakers on my subpanel. I am using it as a table mounted router, for use with the Veritas jack lifter. This is a brand new purchase and so far I am underwhelmed. I cancelled an order for the Dewalt based on these recommendations. But these are aggravations. Now I must just get used to the long wires snaking through the house.
Why is this sophisticated machine not supplied with a 1/4 collet, like its opposition.
|
