|
Makita 6935FDWDEX 14.4-Volt NiMH Cordless Impact Driver Kit with 6337 MForce Drill and ML143 Fluorescent Work Light
Torque, torque and more torque! This package is nothing but power. The 14.4-volt cordless impact driver and the MForce drill put super strength in your hands for the toughest tasks. Despite being beastly powerful, this impact driver is shockingly compact and lightweight, with a total length of under 7 inches and weighing in at a mere 3-1/2 pounds including the battery. But don?t let that mislead you -- impacts per minute range from 0 to 3,200, with a maximum tightening torque of 1,240 in./lbs. And the power doesn?t quit, either, because the nickel-metal-hydride battery packs a greater capacity and longer run time than standard nickel-cadmium versions. Even though it fits snugly in the hand, it?s an absolute dynamo in the power department, and the variable speed is smooth as silk. There are two nifty light-related features on this Makita, and we weren?t all that impressed with them on paper. But in reality, the phosphorescent rubber bumper immediately catches your eye, whether you?re rummaging in your truck, fumbling in your garage or scanning the job site for any left-behind tools. And the integrated high-output LED really does light up the workpiece, saving you time and frustration. We always like to see tools with easily accessible and easily replaced brushes, because if your tool?s in the repair shop, it?s not making you any money. The MForce drill/driver is just as powerful and just as rugged as the impact driver, with the same high-efficiency nickel-metal-hydride battery power. Speed ranges from 0 to 400 and 0 to 1,300 rpm to tackle just about any drilling or driving job, with a Makita-made Shift Lock Drive that lets you switch quickly between modes, locking out the clutch for drilling work. And like the impact driver, the drill in this combo is compact, lightweight and easy on your hardworking body. The rubberized grip absorbs any vibration and feels great in your hand. The fluorescent worklight will come in handy, too, whether you?re in a crawlspace or under an engine. All three pieces are Makita quality, and the price on this combo beats buying them separately. -- Kris Jensen-Van Heste What?s in the Box
Impact driver, MForce Drill, worklight, two batteries, charger and tool case
Makita 6935FDWDEX 14.4-Volt NiMH Cordless Impact Driver Kit with 6337 MForce Drill and ML143 Fluorescent Work Light Accessories
 Makita 193158-3 1434 14.4-Volt 2.6 Amp Hour NiMH Pod Style Battery
Makita 194157-8 1434 14.4-Volt 2.6 Amp Hour NiMH Pod Style Battery, 2 Pack
Makita 784869-A Shorty 3-1/8-Inch Bit Tip Holder with 12 Bit Tip Assortment
Makita 784874-A Ultralok 15 Piece Drilling and Driving Set
Bosch 1590EVSK 6.4 Amp Top Handle Jigsaw
Makita 193157-5 1234 12-Volt 2.6 Amp Hour NiMH Pod Style Battery
Makita LCT300W 18V Compact Lithium-Ion 3PC Cordless Combo
Makita LXT202 BHP451 18 Volt Hammer Drill & BTD140 18 Volt Impact Driver Lithium-Ion Combo Kit
Denali 79-Piece Drill Driver Accessory Set
Kreg K3MS K3 Master Pocket Hole Jig System
Makita 6935FDWDEX 14.4-Volt NiMH Cordless Impact Driver Kit with 6337 MForce Drill and ML143 Fluorescent Work Light Reviews
A+++ I have always had good luck with Makita products, but I wanted to take this opportunity to mention the great service I have always received from Amazon.
I bought it about two years ago and used the impact driver and light extensively to frame in a wood shop, hang plywood siding, and build several storage areas. Then the tools sat around for a while, and the batteries are pretty much failed, which is a big bummer for trying to build a deck quickly. The bottom line is that these are great tools. The 14.4 batteries are adequate, they just need proper care. I know my batteries died off because they lived in a very hot area and were not used for a while. Anyway, the drill is good, with adequate power.
If you abuse them, never fully discharge them, only charge them partially, and use them excessively, of course they will wear out. I accidentally dropped it in a bucket of water while remodeling a bathroom, which did not damage the tool in any way. But those usually end up shattering. I have also never broken a screw head off.
It's a tad hard on driver bits though - I got tired of battering standard drive bits, so I bought a bunch of hardened driver bits. I think I probably stored at least one of them dead as well, as the work I was doing abruptly stopped due to my wife's unexpected pregnancy.I will replace the batteries, but I wish they weren't so expensive. This set was a good value. To those who complain about poor durability, I can say that batteries require special consideration to maximize their life - it is very important to charge them fully before the first use and to care for them as the manufacturer specifies.
The impact driver is one of my favorite tools. The light is bright and way more useful than I thought it would be. It is good that the chuck can be adjusted for very light torque for delicate operations (even though finishing the screw by hand is better if you need to be really careful).
I've had Makita drills ( 12 and 9.6 volt ) for years and I am very happy with them. Drywall, decks, working on cars, just to name a few. I use the drill alot but I find myself using the impact driver for alot of things. That is why I purchased this combo package.
Very bright. I love this set. Has a light on it too which comes on when you pull the trigger. Better than some of the 18v types, they are too heavy. The Fluorescent work light is the piece I use the most.
I like how light it is. haha. It is great. Makita makes some nice stuff. The case is great and has metal clamps, not plastic like some tool cases. The Impact driver it fast, and a lot of power.
I would buy this set again.if I didn't already own it. The drill has a 1/2 inch chuck which is a must.
I bought this for the drill and the good price about one year ago. Wonderful set. The drill is very good, the impact driver and light are both AMAZING.
|
