|
Paslode Cordless 16 Gauge Angled Finish Nailer #900600
Paslode IM250A, 2-1/2", Angled, Cordless, Finish Nailer, Drives 1-1/4" To 2-1/2", 16 Gauge, No Hose Or Compressor Required, 1 Year Warranty.
Perfect for finish and trim work that requires getting into small spaces, this Impulse finish nailer from Paslode lets you avoid the hassle of compressor hoses and compressor noise. The nailer's small, lightweight body (just under 5 pounds) is easy to grip and, because you're not hooked up to a hose, doesn't cause as much arm fatigue as other nailers. It drives 1-1/4- to 2-1/2-inch nails and has easy-to-adjust drive depth, a probe position indicator, and an angled clip for improved maneuverability. This Paslode nailer uses a patented system that requires both a fuel cell and an included rechargeable battery. We were impressed with the gun's performance--it's consistent and provides plenty of power for most uses. This model will shoot up to 1,200 nails on a single fuel cell and up to 4,000 nails on a full battery charge. It has a convenient belt hanger, too, so you won't have to lay it on the ground or on top of a ladder, and the high-visibility orange makes it difficult to overlook. The kit includes a plastic carrying case and a lightweight charger. Please note that the nailer does not come with the fuel cell included. --Jonathon Tudor
Paslode Cordless 16 Gauge Angled Finish Nailer #900600 Accessories
 Paslode Short Yellow Fuel Cell 4-Pack #650039 for the Paslode Cordless Trim Nailers
B & C Eagle AF16X2 2-Inch by 16 Gauge by 20 Degree Angled Finish Nail (2,000 per Box)
B & C Eagle AF16X212 2-1/2-Inch by 16 Gauge by 20 Degree Angled Finish Nail (2,000 per Box)
Paslode Cordless IMCT Framing Nailer #900420
Paslode Cordless Battery
B & C Eagle AF16X112 1-1/2-Inch by 16 Gauge by 20 Degree Angled Finish Nail (2,000 per Box)
B & C Eagle AF16X114 1-1/4-Inch by 16 Gauge by 20 Degree Angled Finish Nail (2,000 per Box)
Paslode 650047 2-Inch by 16 Gauge 20 Degree Angled Galvanized Finish Nail (2,000 per Box)
Paslode 650230 1-1/4-Inch by 16 Gauge 20 Degree Angled Galvanized Finish Nail (2,000 per Box)
Paslode Cordless 18 Gauge Finish Nailer #901000
Paslode Cordless 16 Gauge Angled Finish Nailer #900600 Reviews
This involves having to buy and use Paslode's messy, smelly spray cleaner. If you really, really need an airless nail gun, try DeWalt's battery powered nailers - no special cleaner or fuel cells required. Now that you're significantly frustrated - stop working, take the tool apart, clean it, go to Home Depot and buy new fuel cells, and try again. Whether it's expired fuel cells or some other flaw in Paslode's design, you will at some point experience the incredibly frustrating experience of pushing the tip of the tool against your work piece, hearing the fan kick in, pulling the trigger, and - nothing.
If you use the tool infrequently, making the issue of cleaning less significant, then you have to deal with expired fuel cells and the constant expense of buying new fuel cells only to throw away the fuel you don't use right away. This tool requires MUCH more effort than it's worth. You have to disassemble the tool for cleaning after each use, which is a pain if you're using the tool on a daily basis. Otherwise save yourself the expense and frustration and go with the time tested method of using a pneumatic nailer and an air compressor.
Repeat this another 10 times and you get 1 nail.
The techs that have looked at my nail gun can't figure out why it works for 5 minutes ,then the next time you go to use the gun it will not work. The company wants to sell the product, however, if you have a problem with your item the company has zero support after the sale. I have tried to get cutomer service to assit me for over one year. I will never buy or recommend to any one, any product that Paslode sells. So, before you lose alot of Dollars, buy another product that will have customer support after the sale. If you spend hundreds of dollars and you get a defective item, no help is available after the sale.
Works very well, even in hard woods. Great product. I trimmed a whole house and didn't have one issue with it.
All the same problems everyone else has had, except after my Paslode refurbishment it began shooting nails out of the bottom of the nail holder (about an inch from the tip of the gun). I had high hopes for this tool and I really wanted it to work. This is not good at all.
Highly recommended. Bought the Paslode Framing and had such success on the job with it, i considered the finish nailer. Thinking that the finish nailer would be great so taht you are not dragging dirty houses through a home, i read the reviews on amazon and was amazed at the number of poor reviews. Make good contact with the workpiece and it is as simple as that. However, i went for it and just like the framer, this gun has performed flawlessly.
|
