|
Paslode Cordless 18 Gauge Finish Nailer #901000
5/8" - 2", Cordless, Brad Nailer, Featuring Impulse&tmreg. Technology, No Hoses Or Compressors Needed, Quick Clear Nose, Should Nail Jam Occur, Adjustable Work Contact Element, Provides Control Of Nail Setting Depth, Drives 18 Gauge Finish Nails, Leaves Small Hole, Powerful Motor, Drives 5/8" To 2" Fasteners Into The Hardest Wood, Long Narrow Nose, Precise Placement Of Fasteners In Tight Spots.
Paslode's gas-powered nailers offer the power of pneumatics with the convenience and portability of a good old hammer. There's no compressor to haul out of your truck and into the job site, no hoses to connect and no electric power needed. Just pop in the propane gas canister and go! This ultra-light nailer is an upgrade from the 16-gauge version and packs quite a punch despite weighing just 4.9 lbs. It?s capable of driving nails from 5/8-inch all the way up to 2-inches! The 901000 also is very easy to manipulate, thanks to a depth of drive feature that doesn?t require a wrench to adjust. And, your project should come out looking clean as a whistle because the tip is designed not to mar the wood. This tool is the ultimate merger of power and finesse, enabling you to finish off projects like molding, spindles, window casings, and more with a delicate touch. What?s in the Box
Battery, charger, belt hanger, plastic carrying case, safety goggles, extra no-mar tip, Allen wrench The Paslode story
Paslode, a division of Illinois Tool Works (ITW), is a leading manufacturer and marketer of cordless and pneumatic fastening systems for construction, remodeling and industrial applications. Founded in 1935 by industrialist J.W. Leslie, Paslode introduced the very first pneumatic tool -- a light duty upholstery tacker -- in 1959. Shortly thereafter, Paslode produced the first commercially accepted pneumatic nailer, The Gun-Nailer, providing the construction industry with a cost efficient way to increase productivity and reduce worker fatigue. Since then, Paslode has expanded its product lineup to include a comprehensive selection of pneumatic and cordless nail guns, staplers, fasteners, and more.
Paslode Cordless 18 Gauge Finish Nailer #901000 Accessories
 Paslode 650214 1-1/2-Inch by 18 Gauge Galvanized Brad Nail (2,000 per Box)
Paslode Short Yellow Fuel Cell 4-Pack #650039 for the Paslode Cordless Trim Nailers
Paslode 650215 2-Inch by 18 Gauge Galvanized Brad Nail (2,000 per Box)
Paslode Cordless Battery
Paslode 650212 1-Inch by 18 Gauge Galvanized Brad Nail (2,000 per Box)
Paslode Cordless IMCT Framing Nailer #900420
B & C Eagle B18-2 2-Inch by 18 Gauge Galvanized Finish Brad Nail (5,000 per Box)
Paslode Cordless 16 Gauge Angled Finish Nailer #900600
B & C Eagle B18-34 3/4-Inch 18 Gauge Galvanized Brad Nail (5,000 per Box)
B & C Eagle B18-112 1-1/2-Inch by 18 Gauge Galvanized Finish Brad Nail (5,000 per Box)
Paslode Cordless 18 Gauge Finish Nailer #901000 Reviews
Maybe I expected too much but I am the only person that uses my tools and trim work is all I do so I know it was not abused.It worked fine for a while then it became high dollar junk. I bought 2 dewalt 18 volt finish nailers and have shot many boxes of nails with no problems. Bought this product to make my job easier as a trim carpenter but was not what i expected. I feel that paslode let me down. I finally sold it at a garage sale for 100 dollars and was glad to get rid of it.
This is offset in part by the fact that the same fuel cell works in the 16 gauge finish nailers. You can get it with free shipping for $ 249.00 if you look around- Nail barn and elsewhere. Decisions decisions. Be advised that Paslode's MSRP for this product is lowered to $ 259.00 so don't pay above that. Awesome product, free of cords, hoses and heavy ancillary equipment. If you are not a pro though, is it worth paying so much more than pneumatic. If you are not a pro, the only drawback is the shelf life of the fuel cell.
WE HAVE 25 NAIL GUNS, ALL ARE PASLODE. I THINK THAT COVERS EVERYTHING YOU WOULD NEED TO KNOW.
Pros- . In general, it's good to have around in a pinch, but don't count on it to do any serious work, you'll end up costing yourself more time, money, and frustration. During heavy construction usage, battery charger A/C unit is easily compromised.
Gas intake valves have been faulty twice (My company owns three of these suckers) - a 50 Dollar repair. Good Case. Note: The newest model of 18 gauge has seemed more solid and reliable, I've only used it a handful of times, but time will tell. Cons & Problems-. (The power conection is weak) . This thing misfires just like the other Paslode Cordless guns, but not as bad as the framing gun.
I'll get right to the pros and cons. Obviously, convenience- sometimes you don't need to lug in a whole compressor setup for just handyman type work. The tip mecanism broke off completely on one gun. The driving pin gets constantly stuck, even with constant care and lubrication.
beats seting up a compressor even on midsize jobs. CHECK THE DATE ON THE PACKAGE(or canister). pros. (i work with alot of oak). -must be cleaned atleast once daily maybe more if you are shoting alot.
Cons. -aside from gas and nails you need to buy paslode brand cleaner spray and oil. -not angled. -lots of shots to battery and gas. -gas is not cheap AND HAS A SHELF LIFE.
-very tempermental. -belt clip is handy (clips on most step ladder stays). i have used one of these for a few years and it has been a real time saver. -power to sink nails in to hardwood.
if you cant use a box in less then a year or it had been sitting on the shelf at the store for awhile it will go bad cusing misfires. -loud.
|
